以这个红绿曲折线止损，怎么写？

100021360

VAR1:=(2*CLOSE+HIGH+LOW+OPEN)/5;
A1:(EMA(VAR1,14)+EMA(VAR1,14)+EMA(VAR1,14)+EMA(VAR1,14))/4,COLORRED,LINETHICK2;

HH1:=IF(H<REF(H,1) AND REF(H,1)<REF(H,2),REF(H,2),0);
LL1:=IF(L>REF(L,1) AND REF(L,1)>REF(L,2),REF(L,2),0);
HH2:=VALUEWHEN(HH1>0,HH1)NODRAW;
LL2:=VALUEWHEN(LL1>0,LL1)NODRAW;
HH:=HHV(HIGH,1)/10+HHV(HIGH,2)/10+HHV(HIGH,2)/10+HHV(HIGH,4)/10+HHV(HIGH,4)/10+HHV(HIGH,8)/10+HHV(HIGH,8)/10+HHV(HIGH,13)/10+HHV(HIGH,40)/10+HHV(HIGH,20)/10;
LL:=LLV(LOW,1)/10+LLV(LOW,2)/10+LLV(LOW,2)/10+LLV(LOW,4)/10+LLV(LOW,4)/10+LLV(LOW,8)/10+LLV(LOW,8)/10+LLV(LOW,13)/10+LLV(LOW,40)/10+LLV(LOW,20)/10;
H1:=IF(HH<REF(HH,1) AND LL<REF(LL,1) AND REF(OPEN,1)>CLOSE AND OPEN>CLOSE AND (HHV(OPEN,0)-CLOSE)>0,REF(HH,2),0);
L1:=IF(LL>REF(LL,1) AND HH>REF(HH,1) AND REF(OPEN,1)<CLOSE AND OPEN<CLOSE AND (CLOSE-LLV(OPEN,0))>0,REF(LL,2),0);
H2:=VALUEWHEN(H1>0,H1),LINETHICK2;
L2:=VALUEWHEN(L1>0,L1),LINETHICK2;
K1:=IF(C>H2,-3,IF(C<L2,1,0))NODRAW;
K2:=VALUEWHEN(K1<>0,K1)NODRAW;
G:=IF(K2=1,H2,L2);
G1:=VALUEWHEN(ISLASTBAR,G);

DRAWSL(K2=1,G,0,1,0),COLORGREEN,VTDOT;
STICKLINE(K2=1 AND G<>REF(G,1)AND REF(K2,1)=1,G,REF(G,1),0,0),COLORGREEN,VTDOT;
DRAWSL(K2=-3,G,0,1,0),COLORYELLOW,VTDOT;
STICKLINE(K2=-3 AND G<>REF(G,1)AND REF(K2,1)=-3,G,REF(G,1),0,0),COLORYELLOW,VTDOT;

技术老师，以这个红绿曲折线止损，怎么写？

100021360

有时会触及，但是没有打破就不要止损，打破了才止损

技术008

if close<a1 then sell(1,holding,marketr);

100021360

DRAWSL(K2=1,G,0,1,0),COLORGREEN,VTDOT;
STICKLINE(K2=1 AND G<>REF(G,1)AND REF(K2,1)=1,G,REF(G,1),0,0),COLORGREEN,VTDOT;
DRAWSL(K2=-3,G,0,1,0),COLORYELLOW,VTDOT;
STICKLINE(K2=-3 AND G<>REF(G,1)AND REF(K2,1)=-3,G,REF(G,1),0,0),COLORYELLOW,VTDOT;
是这个曲线呀，不是A1

技术008

if close<G then sell(1,holding,marketr);

100021360

可不可以30秒主周期上跨周期引用这个十五秒的这个止损

技术008

VAR1:=(2*CLOSE+HIGH+LOW+OPEN)/5;
A1:(EMA(VAR1,14)+EMA(VAR1,14)+EMA(VAR1,14)+EMA(VAR1,14))/4,COLORRED,LINETHICK2;

HH1:=IF(H<REF(H,1) AND REF(H,1)<REF(H,2),REF(H,2),0);
LL1:=IF(L>REF(L,1) AND REF(L,1)>REF(L,2),REF(L,2),0);
HH2:=VALUEWHEN(HH1>0,HH1)NODRAW;
LL2:=VALUEWHEN(LL1>0,LL1)NODRAW;
HH:=HHV(HIGH,1)/10+HHV(HIGH,2)/10+HHV(HIGH,2)/10+HHV(HIGH,4)/10+HHV(HIGH,4)/10+HHV(HIGH,8)/10+HHV(HIGH,8)/10+HHV(HIGH,13)/10+HHV(HIGH,40)/10+HHV(HIGH,20)/10;
LL:=LLV(LOW,1)/10+LLV(LOW,2)/10+LLV(LOW,2)/10+LLV(LOW,4)/10+LLV(LOW,4)/10+LLV(LOW,8)/10+LLV(LOW,8)/10+LLV(LOW,13)/10+LLV(LOW,40)/10+LLV(LOW,20)/10;
H1:=IF(HH<REF(HH,1) AND LL<REF(LL,1) AND REF(OPEN,1)>CLOSE AND OPEN>CLOSE AND (HHV(OPEN,0)-CLOSE)>0,REF(HH,2),0);
L1:=IF(LL>REF(LL,1) AND HH>REF(HH,1) AND REF(OPEN,1)<CLOSE AND OPEN<CLOSE AND (CLOSE-LLV(OPEN,0))>0,REF(LL,2),0);
H2:=VALUEWHEN(H1>0,H1),LINETHICK2;
L2:=VALUEWHEN(L1>0,L1),LINETHICK2;
K1:=IF(C>H2,-3,IF(C<L2,1,0))NODRAW;
K2:=VALUEWHEN(K1<>0,K1)NODRAW;
G:IF(K2=1,H2,L2);
G1:=VALUEWHEN(ISLASTBAR,G);


然后其他策略通过stkindi去引用
stkindi('','公式.G',0,22,15)

100021360

老师，还在不在，能不能再问个问题？？

技术008

什么

100021360

stkindi('','止损717.G',0,22,15);
if close<stkindi('','止损717.G',0,22,15) then
BEGIN
多头平损1:SELL((HOLDING > 0),0,marketr);
MARK:=0;
END
if close>stkindi('','止损717.G',0,22,15) then
BEGIN
空头平损1:SELLSHORT((HOLDING < 0),0,marketr);
MARK:=0;
END
加载在30秒周期上，不显示止损点，而且如果
平空开多条件:=(((((OPEN >= REF(M,1)) AND ((((HIGH + LOW) + CLOSE) / 3) <= REF((((HIGH + LOW) + CLOSE) / 3),1))) AND (均线斜率 > 0))) AND TR2>REF(TR2,1) AND OPEN>stkindi('','止损717.G',0,22,15) AND (MARK <= 0));
把这段加进去AND OPEN>stkindi('','止损717.G',0,22,15)     就开不了仓，而且卡得要死