[求助]在副图中，如何在两个不同的坐标点之间画横线。而不是连线。非常感谢！！ - 公式模型编写问题提交 - 金字塔客服中心 - 专业程序化交易软件提供商

在副图中，如何在两个不同的坐标之间画横线。而不是连线。非常感谢！！

如图：如何在两个 “前高” 之间画横线。谢谢

dvubb 此主题相关图片如下：图像.jpg

-----------------源码如下-----------------------

DIF:EMA((CLOSE+h+l)/3,12)-EMA((CLOSE+h+l)/3,26);
DEA:EMA(DIF,9);
MACD:DIF;
STICKLINE(MACD>=0,MACD,0 ,5,0) ,COLORred;
STICKLINE(MACD<0,MACD,0 ,5,0 ),COLORGREEN;
STICKLINE(MACD>0 AND MACD<REF(MACD,1),MACD,0,5,0),COLORYELLOW;
STICKLINE(MACD<0 AND MACD<REF(MACD,1),MACD,0,5,0),COLORBLUE;
VA1:=HHVBARS(MACD,BARSLAST(MACD<0)+1);
VA2:=CROSS(BACKSET(CROSS(0,MACD),REF(VA1,1)+2),0.5);
QG:=CROSS(BACKSET(CROSS(0,MACD) OR (ISLASTBAR AND MACD>0),REF(VA1,1)+2),0.5);

///

前高:DRAWLINE(MACD>0.5 AND VA2,MACD,REF(VA2,1),REF(MACD,1),1),COLORMAGENTA;

///

VA3:=LLVBARS(MACD,BARSLAST(MACD>0)+1);
VA4:=CROSS(BACKSET(CROSS(MACD,0),REF(VA3,1)+2),0.5);
BD:=BARSLAST(FILTERX(CROSS(0,MACD),BARSCOUNT(C)));
前低:DRAWLINE(MACD<-0.5 AND VA4,MACD,REF(VA4,1),REF(MACD,1),1);
BDTJ:=IF(MACD<0,FILTERX(MACD=LLV(MACD,BARSLAST(MACD>0)),
BARSCOUNT(C)),DRAWNULL);
TSBDTJ:=BARSLAST(BDTJ);
BDZH:=FILTERX(MACD<CONST(LLV(MACD,BD+1)),BARSCOUNT(C));
BDTS:=BARSLAST(BDZH);
本低:IF(BD+1>=1,CONST(LLV(MACD,BD+1)),DRAWNULL);
BDCL:=CROSS(COUNT(CROSS(MACD>本低/2 AND MACD<0,0.5),TSBDTJ)=1,0.5) AND TSBDTJ>=0;
终点:=IF(ISLASTBAR AND MACD>0 AND MACD=HHV(MACD,BARSLAST(MACD<0)),1,
IF(FILTERX(QG,BARSCOUNT(C)),2,DRAWNULL));
UU:=(终点=1 OR 终点=2) AND MACD>0;
ZZ:=FILTERX(UU,BARSCOUNT(C));
本高:DRAWLINE(ZZ,MACD,REF(ZZ,1),REF(MACD,1),1),COLORWHITE;
横线:=CONST(REF(MACD,BARSLAST(ZZ)));
WW:=MACD>横线;
起始点:=FILTERX(REFX(BARSLAST(WW),1)=1,BARSCOUNT(C));
天数:BARSLAST(起始点),COLORYELLOW,NODRAW;
//上横线:DRAWLINE(起始点,横线,ZZ,横线,0),COLORGREEN,DOTLINE;
//下横线:DRAWLINE(BDZH,CONST(LLV(MACD,BD+1)),BDTJ=1,MACD,0),COLOR8080FF,DOTLINE;
//DRAWNUMBER(BDTJ,CONST(LLV(MACD,BD+1))*0.9,BDTS);
//DRAWNUMBER(ZZ,上横线*1.1,天数);
TJ:=IF(起始点,BARSsince(ZZ),DRAWNULL);
红柱数量:IF(天数>0 AND 天数<=REF(TJ,天数),SUM(MACD>0,天数),DRAWNULL),COLORWHITE,NODRAW;
横线起始价:REF(C,天数),NODRAW;
空间评估:(横线起始价-C)/C*100,NODRAW;
TT:=BARSLAST(ZZ);
WQG:=CROSS(COUNT(CROSS(MACD<本高/2 AND MACD>0,0.5),ZZ)=1,0.5) AND ZZ>=0;
STICKLINE(MACD>前高 AND 本高>前高 AND BARSLAST(CROSS(MACD<本高/2,0.5))>0 AND
MACD>(前高+本高)/2,MACD,前高,1,0),COLORYELLOW;

//前高本高二分位:IF(MACD>0 AND 本高<>前高,WQG,REF(WQG,1),REF((前高+本高)/2,1),1),DRAWNULL),COLORC0C000,DOTLINE;
AA:=STRCAT(STRCAT(STRCAT('〖','上升空间'),'〗'),CONST(IF(空间评估,空间评估,DRAWNULL)));
DRAWTEXT(WQG,MACD*1.1,'本高成立'),COLORWHITE;
DRAWTEXT(BDCL,MACD*1.1,'本低成立'),COLORWHITE;
STICKLINE(MACD>前高,MACD,前高,1,0),COLORYELLOW;
STICKLINE(WQG,MACD,0,1,0),COLORGREEN;
STICKLINE(MACD<0 AND MACD<前低 AND 前低<0,MACD,前低,1,0),COLORBLUE;
B1:=IF(CROSS(MACD<0,0.5),BARSsince(BDTJ),DRAWNULL);
TSB1:=BARSLAST(MACD>0)-1;
STICKLINE(BARSLAST(BDCL)>=0 AND MACD<前低 AND MACD<0,MACD,前低,1,0),COLORGREEN;
STICKLINE(BDCL,MACD,0,1,0),COLORWHITE;
STICKLINE(MACD>前高 AND 本高>前高 AND BARSLAST(WQG)>0,
MACD,前高,1,0),COLORRED;
DRAWTEXT(MACD>0.5 AND VA2 AND VA2!=UU,(MACD/10)*9,'前');
DRAWTEXT(MACD>0.5 AND VA2 AND VA2!=UU,MACD/10,'高');
DRAWTEXT(MACD<-0.5 AND VA4 AND VA4!=UU,(MACD/10)*9,'前');
DRAWTEXT(MACD<-0.5 AND VA4 AND VA4!=UU,MACD/10,'低');

DRAWTEXT(ZZ,(MACD/10)*9,'本'),COLORWHITE;
DRAWTEXT(ZZ,MACD/10,'高'),COLORWHITE;
DRAWTEXT(BDTJ,(MACD/10)*9,'低'),COLORRED;
DRAWTEXT(BDTJ,MACD/10,'本'),COLORRED;
IF(BARSLAST(BDCL)>=0,本低/2,DRAWNULL),COLORRED,DOTLINE;
//DRAWBAND(IF(DIF,DIF,DRAWNULL),RGB(250,250,250),DIF,RGB(0,0,0));
//DRAWBAND(IF(DEA,DEA,DRAWNULL),RGB(250,250,10),DEA,RGB(0,0,0));

[此贴子已经被作者于2013/6/18 15:32:08编辑过]

主题：[求助]在副图中， 如何在两个不同的坐标点之间画横线。而不是连线。非常感谢！！

主题：[求助]在副图中，如何在两个不同的坐标点之间画横线。而不是连线。非常感谢！！