主题：指标写成模型.将C改为最高价

将C改为最高价h为开多.low为开空

改成了之后用何条件开仓？

 

平多的KP用的是最高价还是最低价？

如果用最高价就是这样写的

 

VAR1:=EMA(EMA(h,9),9);
VAR2:=REF(VAR1,1);
kp1:(VAR1-VAR2)/VAR2*100000;
VAR3:=EMA(EMA(l,9),9);
VAR4:=REF(VAR1,1);
kp2:(VAR1-VAR2)/VAR2*100000;
{将C改为最高价h为开多.low为开空}
KD:=cross(kp1,0);         //开多条件
PD:=kp1<0;          //平多条件
KK:=cross(0,kp2);        //开空条件
PK:=kp2>0;           //平空条件
if pk then sellshort(1,0,market);
if kd then buy(holding=0,1,market);
if pd then sell(1,0,market);
if kk then buyshort(holding=0,1,market);

VAR1:=EMA(EMA(h,9),9);
VAR2:=REF(VAR1,1);
kp1:(VAR1-VAR2)/VAR2*100000;
VAR3:=EMA(EMA(l,9),9);
VAR4:=REF(VAR1,1);
kp2:(VAR1-VAR2)/VAR2*100000;
{将C改为最高价h为开多.low为开空}
KD:=cross(kp1,0);         //开多条件
PD:=kp1<0;          //平多条件
KK:=cross(0,kp2);        //开空条件
PK:=kp2>0;           //平空条件
if pk then sellshort(1,0,limitr,close);
if kd then buy(holding=0,1,limitr,close);
if pd then sell(1,0,limitr,close);
if kk then buyshort(holding=0,1,limitr,close);

if pk then sellshort(1,0,limitr,open+mindiff);
if kd then buy(holding=0,1,limitr,open+mindiff);
if pd then sell(1,0,limitr,open+mindiff);
if kk then buyshort(holding=0,1,limitr,open+mindiff);

if pk then sellshort(1,0,limitr,h);
if kd then buy(holding=0,1,limitr,open+mindiff);
if pd then sell(1,0,limitr,l);
if kk then buyshort(holding=0,1,limitr,open+mindiff);

开仓不用开盘价+1了？

 

if pk then sellshort(1,0,limitr,h);
if kd then buy(holding=0,1,limitr,h);
if pd then sell(1,0,limitr,l);
if kk then buyshort(holding=0,1,limitr,l);