修改模型 - 公式模型编写问题提交 - 金字塔客服中心 - 专业程序化交易软件提供商

老师请帮忙写成金字塔程序化交易模型

出现（可以接多）信号后下一根K线平空单反手开多单，出现（顶部接空）信号平多单反手开空单，多空单的止损点放在下单前一根K线的最高或者最低点，谢谢！

LONG:=26;

M:=3;

SHORT:=8;

DIFF1:=EMA(CLOSE,SHORT) - EMA(CLOSE,LONG);

DEA1:=EMA(DIFF1,M);

MACD:=2*(DIFF1-DEA1);

DIFF : EMA(CLOSE,SHORT) - EMA(CLOSE,LONG),COLORFF00FF,LINETHICK2;

DEA : EMA(DIFF1,M),colorwhite,LINETHICK2;

AH:HHV(DIFF1,55),COLOR6600FF,LINETHICK2,LAYER0;

DRAWICON( REF(AH=DIFF1,1) AND DIFF<REF(DIFF1,1),AH,8),ALIGN1;

AL:LLV(DIFF1,55),COLOR248A24,LINETHICK2,LAYER0;

DRAWICON( REF(AL=DIFF1,1) AND DIFF>REF(DIFF1,1),AL,7),ALIGN1;

{●60零上金叉:IF(CROSS(DIFF,DEA) AND DIFF>0,0.3,0),COLOR6600FF,POINTDOT;

STICKLINE(●60零上金叉,DIFF,AH,4,0),COLOR6600FF;

}

■零下金叉:IF(CROSS(DIFF,DEA) AND DIFF<-0.001,0.3,0),colorwhite,POINTDOT;

STICKLINE(■零下金叉,0.1,0.15,6,0),colorwhite;

JCCOUNT:=COUNT(CROSS(DIFF,DEA),BARSLAST(DEA>=0));

■二次金叉:IF(CROSS(DIFF,DEA) AND DEA<0 AND COUNT(JCCOUNT=2,21)=1,0.2,0),COLOR3C86CC,POINTDOT;

STICKLINE(■二次金叉,0.15,0.2,6,0),COLOR3C86CC;

A3:=CROSS(DIFF,DEA) AND DEA<0;

■零下二次金叉:IF(FILTER(COUNT(A3,21)=2,10) AND DEA<0,0.05,0),COLORF58F98,POINTDOT;

STICKLINE(■零下二次金叉,0.25,0.3,6,0),COLORF58F98;

A1:=BARSLAST(REF(CROSS(DIFF,DEA),1));

■底背离:IF(REF(CLOSE,A1+1)>CLOSE AND DIFF>REF(DIFF,A1+1) AND CROSS(DIFF,DEA),0.1,0),COLORFFFF00;

底背离1:STICKLINE(REF(CLOSE,A1+1)>CLOSE AND DIFF>REF(DIFF,A1+1) AND CROSS(DIFF,DEA),0,AL,4,0),COLOR00FF00;

STICKLINE(■底背离,0.2,0.25,6,0),COLORFFFF00;

{A2:=BARSLAST(REF(CROSS(DEA,DIFF),1));

顶背离:STICKLINE(REF(CLOSE,A2+1)<CLOSE AND REF(DIFF,A2+1)>DIFF AND CROSS(DEA,DIFF),0,DIFF,4,0),colorblack;

DRAWLINE(A2=0,DEA,顶背离,DEA,0),colorgreen;

}

DD:=C=HHV(C,100);

EE:=DEA1< REF(DEA1,1) AND REF(DEA1< REF(DEA1,1),1)=1;

CC:=C> REF(C,1) AND REF(C> REF(C,1),1)=1;

上升背离:(CC AND EE)*AH,STICK,LINETHICK2,COLORFF00FF;

顶背离:(DD AND EE AND DEA1< HHV(DEA1,100))*AH,STICK,LINETHICK2,coloryellow;

DRAWTEXT(顶背离,DEA1/2,'顶背离'),ALIGN1,coloryellow;

FF:=C=LLV(C,100);

GG:= DEA1> REF(DEA1,1) AND REF(DEA1> REF(DEA1,1),1)=1;

LL:=C< REF(C,1) AND REF(C< REF(C,1),1)=1;

下降背离:(LL AND GG)*AL,STICK,LINETHICK2,colorwhite;

底背离:(FF AND GG AND DEA1> LLV(DEA1,100))*AL,STICK,LINETHICK2,COLOR6600FF;

DRAWTEXT(底背离,DEA1/2,'底背离'),ALIGN1,COLOR6600FF;

IF(DIFF<0,DIFF,0),COLORFF00FF,LINETHICK2,LAYER0;

IF(DIFF<0,0,DIFF),coloryellow,LINETHICK2,LAYER0;

IF(DIFF<DEA,DIFF,DEA),COLORFFFF00,LINETHICK2,LAYER0;

IF(DIFF>DEA,DEA,DEA),colorwhite,LINETHICK2,LAYER0;

VAR1:=HHV(DEA,53);

VAR2:=LLV(DEA,30);

VAR3:=DEA-(DIFF-DEA);

UP:IF(DIFF>VAR1 AND DEA=VAR1,MAX(LLV(VAR1,10),VAR3),VAR1),COLORBB9A00,LINETHICK2,LAYER0;

DN:IF(DIFF<VAR2 AND DEA=VAR2,MIN(HHV(VAR2,10),VAR3),VAR2),COLORAA00BB,LINETHICK2,LAYER0;

底部接多:=CROSS(DIFF ,DEA ) AND CROSS( DIFF,DN ) AND DN<0;

底部接多A:底部接多*AL,STICK,LINETHICK4,COLOR8080FF;

DRAWTEXT(底部接多,DN,'底部接多'),ALIGN1,COLOR8080FF,LINETHICK2,LAYER0;

顶部接空:=CROSS(DEA ,DIFF ) AND CROSS( UP,DIFF ) AND DIFF<UP;

顶部接空A:顶部接空*AH,STICK,LINETHICK4,COLOR9CA010;

DRAWTEXT(顶部接空,DN,'顶部接空'),ALIGN1,COLOR9CA010,LINETHICK2,LAYER0;

主题：修改模型