MA1:=MA(CLOSE,2);
BLL:=MA(CLOSE,144);
UPPER0.25:=(BLL+0.25*STD(CLOSE,55));
UPPER0.5:=(BLL+0.5*STD(CLOSE,55));
UPPER0.75:=(BLL+0.75*STD(CLOSE,55));
UPPER1:=(BLL+1*STD(CLOSE,55));
UPPER1.25:=(BLL+1.25*STD(CLOSE,55));
UPPER1.5:=(BLL+1.5*STD(CLOSE,55));
UPPER1.75:=(BLL+1.75*STD(CLOSE,55));
UPPER2:=(BLL+2*STD(CLOSE,55));
UPPER2.25:=(BLL+2.25*STD(CLOSE,55));
UPPER2.5:=(BLL+2.5*STD(CLOSE,55));
UPPER2.75:=(BLL+2.75*STD(CLOSE,55));
UPPER3:=(BLL+3*STD(CLOSE,55));
LOWER0.25:=(BLL-0.25*STD(CLOSE,55));
LOWER0.5:=(BLL-0.5*STD(CLOSE,55));
LOWER0.75:=(BLL-0.75*STD(CLOSE,55));
LOWER1:=(BLL-1*STD(CLOSE,55));
LOWER1.25:=(BLL-1.25*STD(CLOSE,55));
LOWER1.5:=(BLL-1.5*STD(CLOSE,55));
LOWER1.75:=(BLL-1.75*STD(CLOSE,55));
LOWER2:=(BLL-2*STD(CLOSE,55));
LOWER2.25:=(BLL-2.25*STD(CLOSE,55));
LOWER2.5:=(BLL-2.5*STD(CLOSE,55));
LOWER2.75:=(BLL-2.75*STD(CLOSE,55));
LOWER3:=(BLL-3*STD(CLOSE,55));
AAA:=(CROSS(MA1,LOWER0.25) OR CROSS(MA1,LOWER0.5)
OR CROSS(MA1,LOWER0.75) OR CROSS(MA1,LOWER1) OR CROSS(MA1,LOWER1.25)
OR CROSS(MA1,LOWER1.5) OR CROSS(MA1,LOWER1.75) OR CROSS(MA1,LOWER2)
OR CROSS(MA1,LOWER2.25) OR CROSS(MA1,LOWER2.5) OR CROSS(MA1,LOWER2.75)
OR CROSS(MA1,LOWER3) OR CROSS(MA1,UPPER0.25) OR CROSS(MA1,UPPER0.5)
OR CROSS(MA1,UPPER0.75) OR CROSS(MA1,UPPER1) OR CROSS(MA1,UPPER1.25)
OR CROSS(MA1,UPPER1.5) OR CROSS(MA1,UPPER1.75) OR CROSS(MA1,UPPER2)
OR CROSS(MA1,UPPER2.25) OR CROSS(MA1,UPPER2.5) OR CROSS(MA1,UPPER2.75) OR CROSS(MA1,UPPER3));
B:=(CROSS(UPPER0.25,MA1) OR CROSS(UPPER0.5,MA1) OR CROSS(UPPER0.75,MA1)
OR CROSS(UPPER1,MA1) OR CROSS(UPPER1.25,MA1) OR CROSS(UPPER1.5,MA1)
OR CROSS(UPPER1.75,MA1) OR CROSS(UPPER2,MA1) OR CROSS(UPPER2.25,MA1)
OR CROSS(UPPER2.5,MA1) OR CROSS(UPPER2.75,MA1)OR CROSS(UPPER3,MA1)
OR CROSS(LOWER0.25,MA1) OR CROSS(LOWER0.5,MA1) OR CROSS(LOWER0.75,MA1)
OR CROSS(LOWER1,MA1) OR CROSS(LOWER1.25,MA1) OR CROSS(LOWER1.5,MA1)
OR CROSS(LOWER1.75,MA1) OR CROSS(LOWER2,MA1) OR CROSS(LOWER2.25,MA1)
OR CROSS(LOWER2.5,MA1) OR CROSS(LOWER2.75,MA1) OR CROSS(LOWER3,MA1));
TTT:=TIME>=090900&&TIME<145100;
TEND:=TIME>=145200;
BUY(AAA AND TTT,10,MARKET);
SELL(CLOSE>ENTERPRICE OR CLOSE<ENTERPRICE ,O,MARKET);
BUYSHORT(B,10,MARKET);
SELLSHORT(CLOSE<ENTERPRICE OR CLOSE>ENTERPRICE,O,MARKET);
//收盘前平仓
//sell(time>145400 and holding>0,holding,market);
//sellshort(time>145400 and holding<0,holding,market);

这个平仓SELL(CLOSE>ENTERPRICE OR CLOSE<ENTERPRICE ,O,MARKET);
           SELLSHORT(CLOSE<ENTERPRICE OR CLOSE>ENTERPRICE,O,MARKET);有问题的

怎么能在前面开仓条件上加1到2个点就平仓，请指教！

何谓 开仓条件上加1到2个点 ？？

如果是开仓价加减2个点，可这样：

SELL(CLOSE<ENTERPRICE-2,0,MARKET);
SELLSHORT(CLOSE>ENTERPRICE+1,0,MARKET);

SELL(CLOSE<ENTERPRICE-2,0,MARKET);
SELLSHORT(CLOSE>ENTERPRICE+1,0,MARKET);