以文本方式查看主题
- 金字塔客服中心 - 专业程序化交易软件提供商 (http://weistock.com/bbs/index.asp)
-- 公式模型编写问题提交 (http://weistock.com/bbs/list.asp?boardid=4)
---- 这是教程的程序。问题 (http://weistock.com/bbs/dispbbs.asp?boardid=4&id=72389)
|
-- 作者:FJ6008
-- 发布时间:2014/11/26 12:26:54
-- 这是教程的程序。问题
简单的说明:源码
//中间变量 input:NS(5,0,60,1); Price:=AVGENTERPRICE;//持仓价位 //交易条件 开多平空条件:=CROSS(MA(c,16),MA(c,5)); 开空平多条件:=CROSS(MA(c,5),MA(c,16)); //交易系统 SELLSHORT(开多平空条件 and HOLDING<0,1,market); SELLSHORT(HOLDING<0,1,Stopr,Price+NS); //止损 BUY(开多平空条件 and HOLDING=0,30%,market); SELL(开空平多条件 and HOLDING>0,1,market); SELL(HOLDING>0,1,Stopr,Price-NS);//止损 BUYSHORT(开空平多条件 and HOLDING=0,30%,market);
//其他 资产:asset,noaxis,colorgreen,LINETHICK0; 持从:HOLDING,LINETHICK0; 总次数: TOTALTRADE,LINETHICK0; 盈刟:NUMWINTRADE,LINETHICK0; 此主题相关图片如下:未命名.jpg
|
-- 作者:FJ6008
-- 发布时间:2014/11/26 12:53:16
--
问题:1、没有信号就是三角符号?没有开仓新号吧! 2、SELLSHORT(HOLDING<0,1,Stopr,Price+NS); //止损;这里价格PRICE+NS指的是哪个价格,直接使用开仓价格:enterprice+ns可以吗?3、如果空单是开仓价+ns止损,止盈就是 开仓价-ns;麻烦给写一下吧;多单正好与之相反;4、我上午已经购买3年使用,今后要经常麻烦你们了;主要是把程序搞得好点;
5、图中使用的源码
( stopprice):=ma(c,20);
做多:=。。。。。
多空:。。。。。
//开多 IF ( stopprice)<做多THEN BEGIN SELLSHORT( HOLDING<0,HOLDING,market); //平空操作 BUY( HOLDING=0,1,market);//开多操作 maxprofit:=0; END //平仓 SELL((stopprice)>做空hand HOLDING>0,HOLDING,market);//平多 BUYSHORT((stopprice)>做空 and HOLDING=0,1,market); //开空操作
//多头为例回撤K3平仓 if enterbars>=3 then begin if c>o and holding>0 then sell(1,holding,market); if c<o then buy(holding>0,1,market); end
//空头为例 if enterbars>=3 then begin if c>o and holding<0 then sell(1,holding,market); if c<o then buy(holding<0,1,market); end
给试试,要求就是第3根K线的处理:比如下跌趋势,开仓成立;第3根K线,c>o,平仓止盈;之后,继续按原反方向开仓,直到方向翻转为止;
此主题相关图片如下:未命名.jpg
|
-- 作者:FJ6008
-- 发布时间:2014/11/26 13:12:53
--
此主题相关图片如下:未命名.jpg
|
-- 作者:FJ6008
-- 发布时间:2014/11/26 13:14:28
--
//开多 IF ( stopprice)<l THEN BEGIN SELLSHORT( HOLDING<0,HOLDING,market); //平空操作 BUY( HOLDING=0,1,market);//开多操作 maxprofit:=0; END //平仓 SELL((stopprice)>h and HOLDING>0,HOLDING,market);//平多 BUYSHORT((stopprice)>hand HOLDING=0,1,market); //开空操作
//多头为例回撤K3平仓 if enterbars>=3 then begin if c>o and holding>0 then sell(1,holding,market); if c<o then buy(holding>0,1,market); end
//空头为例 if enterbars>=3 then begin if c>o and holding<0 then sell(1,holding,market); if c<o then buy(holding<0,1,market); end
|
-- 作者:jinzhe
-- 发布时间:2014/11/26 13:18:18
--
1.白色三角箭头,表示这里有信号但是因为你指定的价格不能成交,所以变成不算作是信号
2.你指定的价格,PRICE是你自己定义的,是什么价格自己应该清除。想要用什么价格根据自己的需求来没有固定的规矩
3.所谓止损不是指你要下止损单。这个是两个意思,直接限价下单
sellshort(holding<0,0,limitr,enterprice-ns);
sell(holding>0,0,limitr,enterprice+ns);
4.ok
5.
if enterbars>=3 then begin if c>o and holding>0 then sell(1,holding,market); if c<o and type(1)= 2 then buy(holding>=0,1,market); end
//空头为例 if enterbars>=3 then begin if c>o and holding<0 then sellshort(1,holding,market); if c<o and type(1)=4 then buyshort(holding<=0,1,market); end
|
-- 作者:FJ6008
-- 发布时间:2014/11/26 13:23:52
--
谢谢,再试试
|
-- 作者:FJ6008
-- 发布时间:2014/11/26 15:50:11
--
2.你指定的价格,PRICE是你自己定义的,是什么价格自己应该清除。想要用什么价格根据自己的需求来没有固定的规矩,
谢谢
请教:我使用enterprice可以吧,看看下面我写的对不对,请把止盈的句子给加上写法,我以后模仿使用;谢谢
//交易系统 SELLSHORT(开多平空条件 and HOLDING<0,1,market);//平空
SELLSHORT(HOLDING<0,1,Stopr,enterPrice-NS); //多单止损 BUY(开多平空条件 and HOLDING=0,30%,market);//开多
SELL(开空平多条件 and HOLDING>0,1,market);//平多 SELL(HOLDING>0,1,Stopr,enterPrice+NS);//空单止损 BUYSHORT(开空平多条件 and HOLDING=0,30%,market);//开空
[此贴子已经被作者于2014/11/26 15:51:02编辑过]
|
-- 作者:jinzhe
-- 发布时间:2014/11/26 15:53:01
--
用limitr,平仓止损不是下止损单
|
-- 作者:jinzhe
-- 发布时间:2014/11/26 15:59:15
--
你这样写的太乱,写成这样比较好
if 平多开空条件 then begin
SELLSHORT( HOLDING<0,1,market);//平空
BUY(HOLDING=0,30%,market);//开多
end
if 平空开多条件 then begin
SELL( HOLDING>0,1,market);//平多 BUYSHORT(HOLDING=0,30%,market);//开空
end
if 空单止损条件 then SELLSHORT(HOLDING<0,1,limitr,enterPrice-NS); //空单止损 if 多单止损条件 then SELL(HOLDING>0,1,limitr,enterPrice+NS);//多单止损 你的止损条件是什么?
|
-- 作者:FJ6008
-- 发布时间:2014/11/26 16:05:05
--
此主题相关图片如下:未命名.jpg
此主题相关图片如下:未命名.jpg
|